Seacast Store now Accepting Paypal

Seacast™ Facts

Seacast™ has almost triple the strength of marine plywood!

Seacast™ is made with 35% recycled fiberglass reinforcement...Go Green, Seacast!

Seacast™ is waterproof. It does not absorb water, so it does not rot!

Seacast™ floats!

Seacast™ maintains resiliency at freezing temperatures and does not creep at elevated temperatures!

Seacast™ has excellent impact resistance!

Seacast™ can be pre-fabricated and installed just like plywood!

Seacast™ is very affordable, so everyone can repair a rotted transom!

View our boat repair manual and product test results at:
www.transomrepair.com/zk/literature.shtml

FRP Recycle | Fiber Recovery | Seawolf Design Inc|FRP Green

SEAWOLF ANNOUNCES TOP DISTRIBUTOR OF SEACAST IN THE MIDWEST

New Smyrna Beach, Florida. May 5, 2008– Invision Boatworks is officially Seawolf’s TOP distributor of SEACAST ™ - (having already poured two-thousand gallons) thus giving boat owners a PERMANENT fix for their rotted transom.

SEACAST ™ is a wood replacement and casting compound that combines a mixture of reinforcements and additives to replace rotted transom plywood. The result is a strong high impact resistant that doesn’t absorb water. It doesn’t rot, is three times stronger than marine plywood, is easy to use, and will last for life.

According to Jeff Schroeder, Owner of Invision Boat works. “Seacast is the only option for replacing transoms and the best choice for replacing stringers.”

For additional information, contact Invision Boatworks at: (989) 754-3341, e-mail them at invisionboatworks@speednetllc.com or visit their website: www.invisionboatworks.com.

Seawolf Design, Inc is a full service company offering innovative solutions to the FRP, Composites Fabrication, or Thermoforming Industries. Sea wolf Design, Inc. is a subsidiary of FRP Equipment, Inc.

GOING GREEN SAVES MORE THAN THE ENVIRONMENT

Seawolf’s products and services are as economically advantageous as they are ecologically sound.

New Smyrna Beach, Florida, May 2, 2008 – Seawolf Design Inc. has put together a system that can take a company’s Fiberglass Reinforced Plastics (FRP), recycle it, and make high-quality products.

This system is able to maintain the integrity of the scrap allowing one to construct products like bathtubs, spas, sinks, and boats.

According to Wolfgang Unger, CEO of Seawolf Design Inc, “Our green machine not only increases the quality of products, but companies can reduce costs and increase profits which are really helpful in today’s uncertain economy.”

Seawolf Design Industries can readily accept FRP scrap, supply samples, and test results upon request. They also schedule demonstrations twice monthly.

For additional information, contact Seawolf Design, Inc. at (386) 428-4722 or visit their websites: www.seawolfindustries.com, www.thermoformequip.com, www.compositeworld.com, www.transomrepair.com

Seawolf Design, Inc is a full service company offering innovative solutions to the FRP, Composites Fabrication, or Thermoforming Industries. Sea wolf Design, Inc. is a subsidiary of FRP Equipment, Inc.

Contact: Jonathan Welsh, Public Relations Manager. Sea wolf Design Inc.  (386) 428-4722

THERE’S NO PLACE FOR WOOD IN A FIBERGLASS BOAT

New Smyrna Beach, Florida, May 5, 2008 – For over twenty years, Seawolf Design Inc. has been manufacturing a product that doesn’t rot, is three times stronger than marine plywood, is easy to use, and will last for life.

This product (Seacast) is a wood replacement and casting compound that combines a mixture of reinforcements and additives to supplant rotted transom plywood. The result is a strong high impact resistant that doesn’t absorb water.

According to Wolfgang Unger, CEO of Seawolf Design, Inc. “One can use our Seacast for transoms, repairing sterndrive holes and stringers, and for floors and decks.”

For additional information, contact Seawolf Design, Inc at: (386) 428-4722 or visit their website: www.transomrepair.com.

Seawolf Design, Inc is a full service company offering innovative solutions to the FRP, Composites Fabrication, or Thermoforming Industries. Sea wolf Design, Inc. is a subsidiary of FRP Equipment, Inc.

Contact: Jonathan Welsh, Public Relations Manager. Sea wolf Design Inc.  (386) 428-4722

Seawolf Servicios de Consultas

Seawolf Servicios de Consultas

Nuestro servicio de consulta le proveerá con lo último en las ventajas, desde los más experimentados en la industria de compuestos. Wolfgang Unger, CEO/Presidente y Líder ingeniero, tiene más de 45 años de experiencia en la industria de reciclado y compuestos. Educado en Alemania y con un master en ingeniería marina.

Nuestro servicio completo de consulta para FRP, fabricación de compuestos e industrias de Termo formado no solamente son económicos, además les ayudara a:

· Mejorar sus productos

· Desminuir labores innecesarios

· Mejorar ganancias significantemente

· Mejorar Rendimiento

· Reducir Costos

El precio de consulta puede variar con cada consulta.

Visite nuestro citio para mas informacion: www.seawolfindustries.com